
Roller brush
In the modern metallurgical industry, roller brushes are used in multiple production processes and processes. >Products, briefly introduced below.
1. Pre-Pickling Line: Mainly a brush roller for descaling.
2, Pickling Line: The brush roller is mainly used to remove the stains generated during the pickling process.
3, Cleaning Line: activates the ester-containing surface for effective degreasing; and removes the continuous oil in the electrolyte solution; can be less than 150 The line speed of the meter/min is worn away from rust or oil.
4, Wire Rod and Steel Tube: The main role is to descale.
5, stainless steel line (Stainless Line): descaling with a brush roller to avoid the silver bronze effect; and can thermally annealing the pickling line to reduce the peak Valley height (buffing) can be applied to the finishing process of continuous annealing pickling line.
6. Coil Coating: To obtain an effective chromium treatment and to adhere the coating to the steel sheet.
7. Galvanizing Line: used to remove impurities on the surface of the steel plate, activate the surface of the steel plate; wash the surface of the steel plate.
8. Surface Treating Steel Line: used to clean the board before coating and activate the surface of the board by light sanding.
9. Roll Polishing: The brush roller can be used to remove impurities on the surface of the work roll.