
Board copper wire brush
Wood Board Brush
, copper wire, stainless steel wire and other wire materials, wrapped into a roller called a wooden board brush.
wood board brushing
The wire is clamped on the U-shaped metal strip and then wrapped around the steel tube shaft. It can be customized according to the length of the roll. The wooden board brush is firstly spliced with steel pipes. It can be customized to any length. After the wire brush roller is wound on the steel pipe shaft, it is fixed on the metal wire-cutting machine and repaired according to the specifications. During the process of winding the U-shaped steel wire bead, each spot is welded once every several times to strengthen the fixing.
Wood board brush features
Wood board brushing main material
Copper wire roller from steel wire Steel shaft construction.
The main material of steel wire is 0.1, 0.2, 0.3, 0.4, 0.5, 0.6mm steel wire, stainless steel wire, copper plated steel wire.
Steel shaft has 100-400mm steel pipe and welded heads at both ends.
Main purpose of wood board brush
The main application areas of wood board brushes are four aspects: dustproof, polished, cleaned, and ground.
p>
The wood board brush is mainly used to deburr and finely grind the surface of the object to be parabled. Therefore, it is necessary to determine the type and characteristics of the steel wire for different requirements. For electroplating and polishing, the most ideal brush wire should be bronze wire. If it is a general metal material for surface rusting and deburring, it can be used with a steel wire with good hardness. Steel plate pickling roller, wire brush, metal plate acid Scrubbing, generally used for metal sheet pre-treatment, deep processing equipment supporting.